How to Make a Fidget Spinner Quieter (And Spin Longer)

Photo of author

Fact Checked by



Written by

As an Amazon Associate, I may earn from qualifying purchases at no extra cost to you.

Fidget spinners, those tiny devices that burst onto the scene a few years ago, were initially designed to help individuals with attention disorders but have found their way into the hands of people from all walks of life, providing a simple yet effective way to relieve stress and anxiety. However, the whirring, humming, or clicking sounds produced by these gadgets might not bother the spinner, but they can undoubtedly drive those around them to the brink of madness.

So, how do you make a fidget spinner quieter so it won’t affect those around you?

How to Make a Fidget Spinner Quieter

1. Lubricate the Spinner with Nano Oil

Nano oil is a high-performance lubricant that has gained popularity for its ability to reduce friction and provide smooth, long-lasting lubrication in various applications. It is designed with nanotechnology in mind, utilizing incredibly small particles to achieve exceptional performance.

I highly recommend applying a single droplet of lightweight Nano Oil to your fidget spinner. This versatile lubricant is not only cost-effective but is also widely employed for bearing maintenance in various applications.

Clean the Bearings: Before applying Nano Oil, make sure your bearings are clean. You can use a gentle solvent or cleaning solution to remove dirt or debris.

Apply a Single Drop: Using a fine applicator, carefully apply a single droplet of Nano-Oil to the center of the bearing. Avoid over-lubricating, as excess oil can attract dust and dirt.

Spin and Distribute: Give your spinner a few spins to distribute the oil evenly across the bearing. You should notice an immediate improvement in its performance.

Wipe Excess: If you accidentally apply too much oil, gently wipe away any excess with a clean cloth or paper towel.

Nano Oil is an exceptional choice due to its unique properties and the benefits it offers to your fidget spinner:

  • Silent Spins: One of the primary concerns regarding fidget spinners is noise. Nano Oil’s lubricating properties help minimize noise, allowing for more discreet and peaceful spinning.
  • Corrosion Resistance: Nano Oil helps protect bearings from corrosion and rust. This is especially important if you enjoy using your spinner in different environments or climates.
  • Enhanced Durability: By applying Nano Oil, you can extend the lifespan of your fidget spinner’s bearings. It provides a protective barrier against wear and tear, ensuring that your spinner remains in excellent condition for longer.
  • Reduced Friction: Nano Oil is designed to reduce friction between moving parts, making it ideal for fidget spinner bearings. This reduction in friction results in smoother, quieter spins.

2. Replace the Fidget Spinner Bearing

Upgrading to stainless steel bearings can significantly reduce the noise your fidget spinner generates. Quiet bearings often feature components made of stainless steel, including balls and races. Brands like FZE and Unquiet Hands offer a variety of stainless-steel bearings available in different configurations to suit your specific needs.

Unquiet Hands is another trusted manufacturer known for its commitment to quiet fidget spinners. They offer stainless steel bearings that have been optimized for minimal noise generation. Their range includes different shapes and sizes to accommodate various spinner designs.

How to Replace the Bearing:

  • Disassemble Your Spinner: Carefully disassemble your fidget spinner, taking note of the existing bearing’s size and type.
  • Select the New Bearing: Choose a stainless steel bearing from popular brands like Unquiet Hands that match the specifications of your original bearing.
  • Install the New Bearing: Gently press or fit the new stainless-steel bearing into the spinner’s center, ensuring it sits securely in place.
  • Reassemble Your Spinner: Put your fidget spinner back together, ensuring all components are correctly aligned and tightened.
  • Test and Enjoy: Give your upgraded spinner a whirl, and you’ll likely notice a significant reduction in noise, along with smoother, more satisfying spins.

3. Clean the Bearings

Over time, dust, dirt, and debris can accumulate inside the bearing of your fidget spinner. This buildup can increase friction and noise during spins, diminishing your overall spinning experience. Regularly cleaning your bearing helps maintain its performance and ensures a quieter, smoother spin.

Clean your fidget spinner’s bearing effectively and reduce noise by following this simple process: immerse it in a cup filled with isopropyl or rubbing alcohol, let it soak for 10 to 15 minutes, and then give it a few firm flicks. This method not only cleans the bearing but also helps quiet it down.

  • Prepare Your Materials: You’ll need a cup or container that’s large enough to submerge your fidget spinner, as well as isopropyl or rubbing alcohol. Ensure your spinner has a clean, dry surface to dry on afterward.
  • Disassemble Your Spinner: Carefully remove your fidget spinner, separating the bearing from the other components. Make sure to remember how to reassemble it correctly later.
  • Soak in Alcohol: Place the bearing into the cup filled with isopropyl or rubbing alcohol. Allow it to soak for approximately 10 to 15 minutes. The alcohol will help dissolve and dislodge any dirt or contaminants within the bearing.
  • Flick the Bearing: After the soaking time is up, carefully remove the bearing from the alcohol. Hold it securely and give it a few brisk flicks to dislodge any remaining residue and to help distribute the alcohol within the bearing.
  • Dry Thoroughly: Place the cleaned bearing on a clean, dry surface and let it air dry completely. Ensure there is no residual alcohol left inside the bearing before reassembling your spinner.
  • Reassemble Your Spinner: Carefully reassemble your fidget spinner once the bearing is dry, ensuring that all parts are correctly aligned and tightened.
  • Test the Quiet Spin: Give your spinner a spin, and you should notice a quieter, smoother performance thanks to the freshly cleaned bearing.

4. Get a Fidget Spinner with Heavy Buttons

It’s worth noting that the buttons on your fidget spinner can also impact the overall noise level. Specifically, the weight of the buttons can make a noticeable difference in how quiet or noisy your spinner is during use.

Fidget spinners typically have two main components: the central bearing and the outer buttons/rings. While the bearing is responsible for the core spinning action, the buttons play a crucial role in the spinner’s overall balance and noise production.

  • Light Buttons: Buttons made from lightweight materials like plastics or thin metals are more likely to generate noise during spinning. This is because lighter buttons resonate and vibrate more easily, producing audible sounds as they move.
  • Heavy Buttons: In contrast, buttons made from heavier materials, like brass or stainless steel, are less prone to vibrations and, therefore, tend to be quieter during use. Their added mass dampens vibrations, resulting in a more serene spinning experience.

5. Get a Quiet Fidget Spinner

Rather than going through all the hassles of quieting your fidget spinner, why not buy a new quiet one?

If you’re looking for a quiet fidget spinner right out of the box, several options are explicitly designed to minimize noise on the market. Here are some tips on how to find and select a quiet fidget spinner:

  • Material Matters: Look for fidget spinners made from materials known for their noise-reducing properties. Stainless steel, brass, and titanium are good choices as they dampen vibrations and produce less noise during spinning.
  • High-Quality Bearings: The bearing used in a fidget spinner significantly affects its noise level. Opt for spinners with high-quality, low-noise bearings like ceramic or hybrid ones.
  • Reviews and Ratings: Before purchasing, read reviews and check user ratings to see if the spinner is praised for its quiet operation. Feedback from other users can provide valuable insights.
  • Customizable Buttons: Some fidget spinners allow you to swap out the buttons. Consider spinners that offer customizable options, as you can replace lightweight, noisy buttons with heavier ones for a quieter experience.

How To Make Your Fidget Spinner Spin Longer

Your fidget spinner’s spin duration can be extended significantly by employing any of these techniques:

Remove the ball bearing and apply lubricant or vegetable oil around the edges. This will effectively reduce friction, resulting in smoother and longer spins.

Opt for a fidget spinner made from metal, ceramic, or a hybrid combination of these materials. These materials have greater weight than plastic spinners, leading to considerably longer spin times.

Seek out a fidget spinner with thicker blades, which tend to be heavier. Alternatively, you can select one with weighted rings on the ends, adding extra mass for enhanced momentum.

Boost the weight of your spinner by combining the rings from one spinner with those of another. Stacking double the rings on each blade increases the overall weight and momentum, resulting in extended spin times.

By implementing these strategies, you can transform your fidget spinner into a long-lasting, spinning marvel that goes on and on. Whether you reduce friction, upgrade materials, add weight, or double up on rings, each approach can provide a more satisfying and enduring fidgeting experience.

Final thoughts

From cleaning and lubricating your bearings to selecting the suitable materials and components, we’ve seen how small changes can yield substantial results. Pursuing a quieter fidget spinner isn’t just about reducing noise but also about enhancing the overall spinning experience, allowing us to find moments of focus and calm in our daily lives.

Remember, the quest for a quieter fidget spinner isn’t limited to a single approach. You can customize your spinner, choosing the methods and modifications that best suit your preferences. Whether you opt for silent bearings, heavier buttons, or a well-placed drop of lubricant, each choice can contribute to the serene, noise-free spins you desire.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.